How To Fold Second Row Seats In Ford Explorer? Unlock Hidden Space!

How to fold second row seats in Ford Explorer?

A photo of a folded seat in a Ford Explorer - How to fold second row seats in Ford Explorer?
How to fold second row seats in Ford Explorer? Image source: Carseat Blog

 

To remove the second row of seats from your 2000 Ford Explorer, follow these steps:

Simply unbolt them using a combination of a 3/8-inch ratchet and socket along with an open-ended wrench set.

Next, lean the seat forward, disconnect any wires, unclip the harness, and lift the seat out of the vehicle.

There could be several reasons for wanting to take out your Explorer’s second-row seats.

Like increasing cargo space, reupholstering them, or performing a thorough interior cleaning of your SUV.

While it may require some effort, you can indeed remove these seats.

 

How To Fold Second Row Seats In Ford Explorer?

 

If your second-row seats come equipped with power fold and tumble control, you can effortlessly fold them forward by pressing the appropriate button once.

Additionally, you have the option to manually slide the second-row seats forward and backward by raising the bar located under the front of the seat.

This allows you to shift the seat in either direction.

To manually adjust the recline of the seats, simply pull up on the lever situated on the side of the seat nearest to the door. Push the seat forward or backward to your desired position.

For manually folding the second-row seats flat, pull up on the same lever used for reclining the seats.

But this time, push the seat all the way forward until it lies flat.

Extending the same lever completely upwards will enable you to tumble the seat forward.

 

 

Can You Remove Second Row Seats In Ford Explorer?

 

Certainly, you can remove the second row of seats from your 2000 Ford Explorer.

However, they are not intended for frequent removal, so you will require a set of tools.

Before you begin, it’s essential to heed a few safety precautions:

 

Double-check your airbags:

 

Removing a seat from the second row of your Ford Explorer may impact the functioning of the airbags.

Before allowing passengers to ride in your vehicle with any seats removed, consult the 2000 Ford Explorer Owner Manual.

 

Consider adding a tarp to the floor:

 

Taking out the seats might expose certain brackets and wiring.

If you plan to use your vehicle with the seats removed, for instance, to transport cargo, think about covering the floor with a tarp or rug to safeguard your car, your belongings, and yourself from potential harm.

 

Don’t misplace the bolts:

 

When the time comes to reinstall your seats, you’ll need all the nuts and bolts to secure them correctly.

Store them in a secure location to prevent misplacing them!

 

How To Remove Second Row Seats In Ford Explorer?

 

In just a few straightforward steps, you can carefully remove the second row of seats:

 

  1. Open your car’s doors and locate the bolts positioned beneath the seats.
  2. Utilize a 3/8-inch ratchet and socket or an open-end wrench set to extract the bolts. The choice of tools depends on accessibility and your arm’s length. Depending on your measurements, you may find it easier to turn certain bolts with a wrench rather than a ratchet and socket.
  3. Tilt the seat forward and disconnect the wiring that links to the seat’s underside.
  4. Unfasten the harness that secures the seat to the floor. If the harness proves challenging to unclip manually, a flat-head screwdriver can be employed to pry the latch of the harness and release it.
  5. Raise the seat by placing one hand on the headrest and the other on the bottom of the seat.

 

There you have it! You’re now prepared to tackle any project that necessitates a spacious cabin.

Whether it’s a thorough cleaning, a camping adventure, or a cross-country move.

 

 

Frequently Asked Questions

 

Does Every Car Back Seat Fold Down?

 

Many large sedans from mainstream brands do provide fold-down rear seats, enhancing the versatility of their spacious trunks and creating a more cargo-friendly backseat area.

 

What Is The Safest Seat In A Car?

 

Research data indicates that being seated in the back of a car during an accident is considerably safer than occupying the front seats.

However, the title of the safest seat in the car is reserved for the one location that nobody hopes to find themselves in: the rear-middle seat.

 

Conclusion

 

Removing the second-row seats from your 2000 Ford Explorer can be accomplished with a few straightforward steps.

Simply locate and unbolt them using a 3/8-inch ratchet and socket or an open-ended wrench set.

Afterwards, tilt the seat forward, disconnect any wiring, unclip the harness, and lift the seat out of the vehicle.

There are various reasons you might want to remove these seats, such as increasing cargo space, reupholstering them, or conducting a thorough interior cleaning.

For those with second-row seats equipped with power fold and tumble control, a simple press of a button will do the trick.

You can also manually slide the seats forward and backward by lifting the bar under the front of the seat and adjusting the recline by using the lever on the side of the seat nearest to the door.

And when you need to fold the seats flat, simply pull up on the same lever and push the seat all the way forward.

Remember, while you can remove the second-row seats, it’s not a routine operation, and you should consider airbag functionality and take precautions to protect your vehicle, belongings, and yourself.

Leave a Comment