How To Connect Jumper Cables To Ford Escape? Unlock The Secrets!

How to connect jumper cables to Ford Escape?

A Photo of Jumper Cables - How to connect jumper cables to Ford Escape
How to connect jumper cables to Ford Escape | Photo credit: Ford Blog


Your battery never dies at a convenient time.

If it’s not feasible to remove the battery for charging or replacement or to request a tow truck, your only recourse is to jump-start your car.

Although “jumper packs” containing either a small lead-acid battery (similar to the larger one in your car) or a lithium-ion battery are now available for purchase, it necessitates prior planning and ensuring it is readily available and fully charged.

So, let’s assume you will jump-start your car in the traditional manner: by utilizing a running car.


How To Connect Jumper Cables To Ford Escape?


Position Vehicles and Prepare


Park a car with a charged battery close to the dead one.

Ensure both cars are off, keys removed, and emergency brakes engaged. Turn off all accessories.


Locate Battery Terminals


Lift the hoods and find the positive (+) and negative (-) terminals on both batteries.

Remove corrosion if present, but avoid touching it.


Connect Jumper Cables


Use red clamps for positive terminals and black clamps for negative. Connect in this order:

  1. Dead battery’s positive terminal (+)
  2. Charged battery’s positive terminal (+)
  3. Charged battery’s negative terminal (–)
  4. Dead battery’s engine metal (–)


Jump-Start the Car


Start the booster car’s engine.

Then start the dead car. Wait if needed.

Rain is safe for jump-starting.


Disconnect Jumper Cables


Remove the cables in reverse order:

  1. Dead battery’s negative clamp
  2. The booster battery’s negative clamp
  3. The booster battery’s positive clamp
  4. The dead battery’s positive clamp


Drive the Jump-Started Car


Close the hood, store cables, and drive for at least 20 minutes to recharge.

Park safely, and consider battery replacement if problems persist.



Things To Consider Before Connecting Jumper Cables To Jump Start Your Car.


Before attempting to jump-start your vehicle, remember these key points:

  1. If your car’s engine is cranking at a normal speed when you try to start it but fails to start, the issue likely isn’t the battery. Jump-starting won’t help in this case. It could be a problem with the fuel pump, ignition, or timing belt. Continuously trying to start it may worsen the situation.
  2. Keep in mind that modern cars may have batteries located in unconventional places, such as the trunk, under the rear seat, or in hard-to-reach spots. Some vehicles may also have remote battery terminals for safety during jumps. Consult your owner’s manual or conduct a search to locate them if needed.
  3. Some modern cars use “side post” batteries with flat disc-like terminals and washer-like connectors attached with small, hard-metal bolts. These batteries can make it challenging to establish a solid connection with jumper cables. You might need to clean the terminals or adjust the clamps to ensure a good contact surface.
  4. Determine why the battery discharged. If it was due to leaving the lights on, it’s a temporary issue. However, if a faulty alternator or a broken drive belt caused the problem, jumping the car won’t provide a permanent solution. Check the drive belt visually; if it’s missing from some pulleys, it likely broke.
  5. When dealing with a “dead” car, observe whether the engine turns over, if you hear a “click,” or if there’s no sound at all. If there’s no sound, ensure the automatic transmission is in the Park position, as attempting to start it in Drive or Reverse won’t engage the starter motor.


How to Connect Jumper Cables To Hybrid Or Electric Vehicles


With the increasing number of electric cars on the road, more people are inquiring about the process of jump-starting a hybrid vehicle.

The straightforward answer is that jump-starting an electric car or hybrid follows a process akin to that of a traditional gas-powered car.

It’s essential to acknowledge that hybrids are equipped with two batteries: a 12-volt battery, resembling a conventional car battery, and a more robust setup responsible for powering the electric motor.

Many manufacturers have placed the auxiliary 12-volt battery of hybrids in unconventional locations.

Some have positioned jump-start tabs under the hood within the fuse box for ease of access.

Since this arrangement varies depending on the make and model, consulting the vehicle’s manual is the best approach for guidance on jump-starting a hybrid.

Electric vehicles (EVs) share a similar scenario.

A 12-volt battery is responsible for keeping the electronics operational when the EV is powered off.

If this battery becomes depleted, it may require a jump-start to activate the motor.

It’s important to note that attempting to jump-start an EV using another EV, even if they are of the same brand, is not feasible.

The 12-volt system in electric vehicles is not designed to provide this type of service to another EV.



What To Do If Your Car Won’t Jump Start?


You’ve acquired the knowledge of jump-starting a car, but what should you do if the car still refuses to start despite your efforts?

There are several situations that can lead to an unsuccessful jump-start:


Verify Cable Connections:


Firstly, double-check the connections of the booster cables.

Ensure that they are securely attached and free from any corrosion on the battery terminals to guarantee a solid connection.


Weak or Failed Battery:


Sometimes, batteries can be too old and weak, rendering a jump-start ineffective.

In such cases, replacing the battery becomes a necessity. Be prepared to invest around $250 or more for a new battery.


Clicking Sound:


If you hear a clicking sound while attempting to jump-start the car, this could signify a problem with the starter.

In such instances, you might need to consider a starter replacement, which can cost approximately $750 if performed at a dealership service center.




How do you put jumper cables on a Ford?


How do you jump a 2013 Ford Escape?



In conclusion, jump-starting a car, including a Ford Escape, involves a straightforward process, as outlined in the provided instructions.

Remember that it’s essential to follow the correct sequence when connecting jumper cables to ensure safety and effectiveness.

If the jump-starting process does not resolve the issue, further diagnostics may be necessary, as outlined in the earlier section on what to do if your car won’t jump-start.

Leave a Comment