How To Change The Brake Light Bulb Ford Fiesta 2015

If you own a Ford Fiesta 2015 model, you may need to change the brake light bulb at some point.

The brake light bulb is an important safety feature that alerts other drivers when you are slowing down or stopping.

Replacing the brake light bulb is not a difficult task, but it requires some tools and steps.

In this article, we will show you how to change the brake light bulb on a Ford Fiesta 2015 in a few simple steps.

You will need a torx screwdriver, a new brake light bulb, and a few minutes of your time. Follow the instructions below and you will be able to change the brake light bulb on your own.

An infographic of How to Change Brake Light Bulb - Ford Fiesta 2015

Specific brake light bulb type of Ford Fiesta 2015

The Ford Fiesta 2015 utilizes a 380 Double Contact brake light bulb.

This type of bulb is halogen-based and features a bayonet base, incorporating two filaments: one for the brake light function and another for the tail light.

These bulbs are readily available for purchase from a variety of sources, both online and offline, including retailers like AutoZone and Autodoc.

To replace the bulb in your Ford Fiesta 2015, you will require a Torx screwdriver.

Tools required for the replacement

To replace the brake light bulb on your Ford Fiesta 2015, you will need the following tools:

  • replacement brake light bulb of type 380 Double Contact
  • flathead screwdriver or a socket wrench to remove the screws that hold the tail light assembly
  • clean cloth to wipe the bulb socket and avoid touching the new bulb with your fingers

Difficulty level

The difficulty level of the process of changing the brake light bulb on a Ford Fiesta 2015 is beginner.

It is a simple and quick task that anyone can do with the right tools and instructions.

You do not need any special skills or experience to replace the brake light bulb on your Ford Fiesta 2015.

However, you should always be careful when handling electrical components and follow the safety precautions.

Safety precautions

Safety precautions are very important when working on your car, especially when dealing with electrical components.

Before you start changing the brake light bulb on your Ford Fiesta 2015, you should follow these steps:

  • Park your car on a level surface and away from traffic. This will prevent your car from rolling or being hit by other vehicles.
  • Engage the parking brake and turn off the ignition. This will prevent your car from moving or starting accidentally.
  • Turn off the engine and wait for it to cool down. This will prevent you from burning yourself or damaging the engine components.
  • Disconnect the negative battery terminal. This will prevent any electrical shocks or short circuits when you remove the bulb.
  • Wear gloves and eye protection. This will protect your hands and eyes from any dirt, grease, or glass fragments.

By following these safety precautions, you will be able to change the brake light bulb on your Ford Fiesta 2015 safely and easily.

Remember to reconnect the battery terminal and test the brake light after you finish.

Alternative methods

There exist alternative approaches to reach the brake light bulb of a Ford Fiesta 2015, depending on the model and owner’s preference.

One option involves completely removing the taillight assembly from the vehicle instead of simply loosening the metal clips.

Although this method provides more workspace, it entails additional steps and tools.

The process includes disconnecting the electrical connector, unscrewing the nuts securing the taillight assembly, and carefully pulling it out.

Subsequently, the bulb can be replaced, followed by reattaching the assembly in reverse order.

Another alternative is accessing the brake light bulb from within the trunk rather than externally.

This approach may be simpler for certain models like sedans or hatchbacks.

It involves removing the trunk liner, plastic cover, and foam insulation to expose the bulb socket.

Then, the bulb can be twisted and pulled out, and replaced with a new one. Reassembly is conducted in the opposite sequence.

These alternative methods offer flexibility in accessing the brake light bulb on a Ford Fiesta 2015.

Individuals can select the approach that best suits their needs, or follow the original method outlined in the previous message.

Regardless of the chosen method, changing the brake light bulb independently is achievable with basic tools and guidance.

Troubleshooting tips

Here are some helpful troubleshooting tips to address common issues that may arise during the brake light bulb replacement process for a Ford Fiesta 2015:

Incorrect Bulb Fitment: Ensure you have the correct bulb type, specifically the 380 Double Contact.

Align the bulb properly with the socket and securely twist it until it locks into position. Avoid forcing the bulb or damaging the socket.

Electrical Concerns: If the brake light remains non-functional post-bulb replacement, inspect the fuse box and wiring for signs of damage or corrosion.

Consider replacing any faulty fuses or wiring harnesses. Employ a multimeter to assess circuit voltage and continuity.

Rapid Bulb Burnout: Should the newly installed bulb burn out prematurely, excessive heat or moisture within the taillight assembly could be the culprit.

Try cleaning both the assembly and bulb socket with a dry cloth and apply dielectric grease to deter corrosion.

Additionally, assess the alternator and battery for potential overcharging issues that may lead to bulb overheating.

Related Articles

Leave a Comment